University of Hertfordshire

  1. 2019
  2. The post impact response of flax/UP composite laminates under low velocity impact loading

    Dhakal, H. N., Ghasemnejad, H., Zhang, Z. Y., Ismail, S. O. & Arumugam, V., 8 Jan 2019, In : International Journal of Damage Mechanics. 28, 2, p. 183-199. 17 p.

    Research output: Contribution to journalArticle

  3. Refined Analytical Approximations to Limit Cycles for Non-Linear Multi-Degree-of-Freedom Systems

    Lewis, A., 7 Jan 2019, (Accepted/In press) In : International Journal of Non-Linear Mechanics. NLM_3132.

    Research output: Contribution to journalArticle

  4. One-step hydrothermal synthesis of fluorescence carbon quantum dots with high product yield and quantum yield

    Yanting Xie, Y., Zheng, J., Wang, Y., Wang, J., Yang, Y., Liu, X. & Chen, Y., 2 Jan 2019, In : Nanotechnology. 30, 8, 085406.

    Research output: Contribution to journalArticle

  5. Power Quality Enhancement in Electricity Grids with Wind Energy Using Multicell Converters and Energy Storage

    Merabet Boulouiha, H., Khodja, M., Rahiel, D., Allali, A., Kaddour, F. & Denai, M., 2019, In : Journal of Renewable and Sustainable Energy.

    Research output: Contribution to journalArticle

  6. 2018
  7. Experimental investigation into the effect of magnetic fuel reforming on diesel combustion and emissions running on wheat germ and pine oil

    Thiyagarajan, S., Herfatmanesh, M., Geo, V. E. & Peng, Z., 19 Dec 2018, (Accepted/In press) In : Fuel Processing Technology.

    Research output: Contribution to journalArticle

  8. Power system security enhancement by HVDC links using a closed-loop emergency control

    Benasla, M., Allaoui, T., Brahami, M., Sood, V. & Denai, M., 19 Dec 2018, In : Electric Power Systems Research. 168, p. 228-238 11 p.

    Research output: Contribution to journalArticle

  9. Dynamic simulation of steam generation system in solar tower power plant

    Zhang, Q., Wang, Z., Du, X., Yu, G. & Wu, H., 17 Dec 2018, (Accepted/In press) In : Renewable Energy.

    Research output: Contribution to journalArticle

  10. Influence of barely visible impact damage on post-impact residual flexural properties of hybrid Fibri Rock – Aero Eco-composites

    Dhakal, H. N., Ismail, S. O., Jiang, C. & Sweatman, T., 15 Dec 2018, In : Materials Letters. 233, p. 233 – 237 5 p.

    Research output: Contribution to journalArticle

  11. Miniaturized Resonator and Bandpass Filter for Silicon-Based Monolithic Microwave and Millimeter-Wave Integrated Circuits

    Zhu, H., Yang, Y., Zhu, X., Sun, Y. & Wong, S. W., 12 Dec 2018, In : IEEE Transactions on Circuits and Systems I: Regular Papers. 65, 12, p. 4062-4071 10 p.

    Research output: Contribution to journalArticle

  12. Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses

    Dhakal, H. N., Ismail, S. O., Ojo, S. O. & Smith, J. R., 1 Dec 2018, In : International Journal of Advanced Manufacturing Technology. 99, 9-12, p. 2833-2847 15 p.

    Research output: Contribution to journalArticle

  13. Preparation of N-doped carbon dots based on starch and their application in white LED

    Liu, X., Zheng, J., Yang, Y., Chen, Y. & Liu, X., 1 Dec 2018, In : Optical Materials. 86, p. 530-536 7 p.

    Research output: Contribution to journalArticle

  14. Prediction of compressive strength and ultrasonic pulse velocity of fiber reinforced concrete incorporating nano silica using heuristic regression methods

    Ashrafian, A., Taheri Amiri, M. J., Rezaie-Balf, M., Ozbakkaloglu, T. & Lotfi-Omran, O., 30 Nov 2018, In : Construction and Building Materials. 190, p. 479-494 16 p.

    Research output: Contribution to journalArticle

  15. Three-Dimensional Modelling and Simulation of the Ice Accretion Process on Aircraft Wings

    Wu, H., Lewis, A., Ji, C., Chang, S., Tang, H. & Su, X., 26 Nov 2018, (Accepted/In press) In : International Journal of Astronautics and Aeronautical Engineering. IJAAE-18-8-216.

    Research output: Contribution to journalArticle

  16. Performance Analysis of Millimeter Wave Massive MIMO Systems in Centralized and Distributed Schemes

    Li, J., Yue, D. W. & Sun, Y., 19 Nov 2018, In : IEEE Access. 6, 1

    Research output: Contribution to journalArticle

  17. Effects of 1D and 2D nanofillers in basalt Poly(Lactic Acid) composites for additive manufacturing

    Zotti, A., Zuppolini, S., Tabi, T., Grasso, M., Ren, G., Borriello, A. & Zarrelli, M., 15 Nov 2018, In : Composites Part B: Engineering. 153, p. 364-375

    Research output: Contribution to journalArticle

  18. Simplified design-oriented axial stress-strain model for FRP-confined normal- and high-strength concrete

    Fallah Pour, A., Ozbakkaloglu, T. & Vincent, T., 15 Nov 2018, In : Engineering Structures. 175, p. 501-516 16 p.

    Research output: Contribution to journalArticle

  19. Power Quality Improvement and Low Voltage Ride through Capability in Hybrid Wind-PV Farms Grid-Connected Using Dynamic Voltage Restorer

    Benali, A., Khiat, M., Allaoui, T. & Denai, M., 13 Nov 2018, In : IEEE Access. 6, 1, p. 68634-68648 15 p.

    Research output: Contribution to journalArticle

  20. Effect of Temperature on the Mechanical Properties of 3DPrinted PLA Tensile Specimens

    Grasso, M., Azzouz, L., Ruiz-Hincapie, P., Zarrelli, M. & Ren, G., 12 Nov 2018, In : Rapid Prototyping Journal. 24, 8, p. 1337-1346 10 p.

    Research output: Contribution to journalArticle

  21. Time-efficient fault detection and diagnosis system for analog circuits

    Luo, Q., He, Y. & Sun, Y., 7 Nov 2018, In : Automatika. 59, 3, p. 303-311

    Research output: Contribution to journalArticle

  22. Enhancing Convolutional Neural Networks for Face Recognition with Occlusion Maps and Batch Triplet Loss

    Sáez-Trigueros, D., Meng, L. & Hartnett, M., 1 Nov 2018, In : Image and Vision Computing. 79, p. 99-108 10 p.

    Research output: Contribution to journalArticle

  23. Fiber-reinforced concrete containing ultra high-strength micro steel fibers under active confinement

    Gholampour, A. & Ozbakkaloglu, T., 30 Oct 2018, In : Construction and Building Materials. 187, p. 299-306 8 p.

    Research output: Contribution to journalArticle

  24. Preparation and polymeric encapsulation of powder mineral pellets for self-healing cement based materials

    Alghamri, R., Kanellopoulos, A., Litina, C. & Al-Tabbaa, A., 20 Oct 2018, In : Construction and Building Materials. 186, p. 247-262

    Research output: Contribution to journalArticle

Previous 1 2 3 4 5 6 7 8 ...36 Next