University of Hertfordshire

  1. 2019
  2. Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins

    Azzouz, L., CHEN, Y. K., Zarrelli, M., Pearce, J. M., Mitchell, L., Ren, G. & Grasso, M., 1 Apr 2019, In : Composite Structures. 213, p. 220-230 11 p.

    Research output: Contribution to journalArticle

  3. Refined Analytical Approximations to Limit Cycles for Non-Linear Multi-Degree-of-Freedom Systems

    Lewis, A., 1 Apr 2019, In : International Journal of Non-Linear Mechanics. 110, p. 58-68 11 p., NLM_3132.

    Research output: Contribution to journalArticle

  4. First UK field application and performance of microcapsule-based self-healing concrete

    Al-Tabbaa, A., Litina, C., Giannaros, P., Kanellopoulos, A. & Souza, L., 12 Mar 2019, In : Construction and Building Materials. 208, p. 669-685 17 p.

    Research output: Contribution to journalArticle

  5. Modelling the Effects of Friction on Tool-Chip Interface Temperature During Orthogonal Cutting of Al6061-T6 Aluminium Alloy

    Ojolo, S. J., Ismail, S. O. & Ogbuanu, K., 7 Mar 2019, Proceedings of the International Conference on Industrial Engineering and Operations Management Bangkok, Thailand, March 5-7, 2019. IEOM Society International , p. 930-945 16 p. ID 261

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Biofuel as an alternative shipping fuel: technological, environmental and economic assessment

    Kesieme, U., Pazouki, K., Murphy, A. & Chrysanthou, A., 5 Mar 2019, In : Sustainable Energy & Fuels. 3, 4, p. 899-909 11 p.

    Research output: Contribution to journalArticle

  7. The post impact response of flax/UP composite laminates under low velocity impact loading

    Dhakal, H. N., Ghasemnejad, H., Zhang, Z. Y., Ismail, S. O. & Arumugam, V., 1 Feb 2019, In : International Journal of Damage Mechanics. 28, 2, p. 183-199

    Research output: Contribution to journalArticle

  8. Alterations in clot architecture are associated with low fibrinolytic potential in acute myocardial infarction: Endogenous Fibrinolysis and Fibrin Clot in STEMI

    Spinthakis, N., Gue, Y., Farag, M., Ren, G., Srinivasan, M., Baydoun, A. & Gorog, D., 31 Jan 2019, (Accepted/In press) In : Journal of Thrombosis and Thrombolysis.

    Research output: Contribution to journalArticle

  9. Machinability of natural-fibre-reinforced polymer composites: Convectional vs ultrasonically-assisted machining

    Wang, D., Onawumi, P. Y., Ismail, S. O., Dhakal, H. N., Popov, I., Silberschmidt, V. V. & Roy, A., 31 Jan 2019, In : Composites Part A: Applied Science and Manufacturing. 119, p. 188–195 8 p.

    Research output: Contribution to journalArticle

  10. Entry in progress

    Performance evaluation of marine renewable energy applications with polyester mooring ropes

    Saidpour, H., Li, L. & Vaseghi, R., 23 Jan 2019, (Submitted) In : Renewable Energy.

    Research output: Contribution to journalArticle

  11. BOILING HEAT TRANSFER PREDICTION IN HELICAL COILS UNDER TERRESTRIAL GRAVITY WITH ARTIFICIAL NEURAL NETWORK

    Liang, X., Xie, Y., Day, R. & Wu, H., 13 Jan 2019, (Accepted/In press) In : American Society of Thermal and Fluids Engineers . 8 p.

    Research output: Contribution to journalConference article

  12. Antifungal Bandages Containing Cinnamon Extract

    Ahmed, J., Altun, E., Aydogdu, M. O., Gunduz, O., Kerai, L., Ren, G. & Edirisinghe, M., 8 Jan 2019, (Accepted/In press) In : International Wound Journal.

    Research output: Contribution to journalArticle

  13. Co-Culture of Keratinocyte-Staphylococcus aureus on Cu-Ag-Zn/CuO and Cu-Ag-W Nanoparticle Loaded Bacterial Cellulose:PMMA Bandages

    Ren, G., Edirisinghe, M., Altun, E., Aydogdu, M. O., Crabbe-Mann, M. & Ahmed, J., 1 Jan 2019, In : Macromolecular Materials and Engineering. 304, 1, 14 p., 1800537.

    Research output: Contribution to journalArticle

  14. 2018
  15. Thermal Performance Analysis of an Underground Closed Chamber with Human Body Heat Sources under Natural Convection

    Zhang, Z., Day, R., Wang, K., Wu, H. & Yuan, Y., 25 Dec 2018, In : Applied Thermal Engineering. 145, p. 453-463 11 p., 145.

    Research output: Contribution to journalArticle

  16. Influence of barely visible impact damage on post-impact residual flexural properties of hybrid Fibri Rock – Aero Eco-composites

    Dhakal, H. N., Ismail, S. O., Jiang, C. & Sweatman, T., 15 Dec 2018, In : Materials Letters. 233, p. 233 – 237 5 p.

    Research output: Contribution to journalArticle

  17. Pretreatment-Etidronate Alleviates CoCl2 Induced-SH-SY5Y Cell Apoptosis via Decreased HIF-1α and TRPC5 Channel Proteins

    Li, K., Li, W., Yin, H., Cheong, Y-K., Ren, G. & Yang, Z., 11 Dec 2018, In : Neurochemical research.

    Research output: Contribution to journalArticle

  18. A review of acid recovery from acidic mining waste solutions using solvent extraction

    Kesieme, U., Chrysanthou, A., Catulli, M. & Cheng, C. Y., 1 Dec 2018, In : Journal of Chemical Technology and Biotechnology. 93, 12, p. 3374-3385 12 p.

    Research output: Contribution to journalArticle

  19. Prediction of compressive strength and ultrasonic pulse velocity of fiber reinforced concrete incorporating nano silica using heuristic regression methods

    Ashrafian, A., Taheri Amiri, M. J., Rezaie-Balf, M., Ozbakkaloglu, T. & Lotfi-Omran, O., 30 Nov 2018, In : Construction and Building Materials. 190, p. 479-494 16 p.

    Research output: Contribution to journalArticle

  20. Effects of 1D and 2D nanofillers in basalt Poly(Lactic Acid) composites for additive manufacturing

    Zotti, A., Zuppolini, S., Tabi, T., Grasso, M., Ren, G., Borriello, A. & Zarrelli, M., 15 Nov 2018, In : Composites Part B: Engineering. 153, p. 364-375 12 p.

    Research output: Contribution to journalArticle

  21. Simplified design-oriented axial stress-strain model for FRP-confined normal- and high-strength concrete

    Fallah Pour, A., Ozbakkaloglu, T. & Vincent, T., 15 Nov 2018, In : Engineering Structures. 175, p. 501-516 16 p.

    Research output: Contribution to journalArticle

  22. Effect of Temperature on the Mechanical Properties of 3DPrinted PLA Tensile Specimens

    Grasso, M., Azzouz, L., Ruiz-Hincapie, P., Zarrelli, M. & Ren, G., 12 Nov 2018, In : Rapid Prototyping Journal. 24, 8, p. 1337-1346 10 p.

    Research output: Contribution to journalArticle

  23. Three-Dimensional Modelling and Simulation of the Ice Accretion Process on Aircraft Wings

    Wu, H., Lewis, A., Ji, C., Chang, S., Tang, H. & Su, X., Nov 2018, In : International Journal of Astronautics and Aeronautical Engineering. 23 p., IJAAE-18-8-216.

    Research output: Contribution to journalArticle

  24. Fiber-reinforced concrete containing ultra high-strength micro steel fibers under active confinement

    Gholampour, A. & Ozbakkaloglu, T., 30 Oct 2018, In : Construction and Building Materials. 187, p. 299-306 8 p.

    Research output: Contribution to journalArticle

Previous 1 2 3 4 5 6 7 8 ...14 Next