University of Hertfordshire

By the same authors

Design of an Elliptic Filter Using Multiple-Loop Feedback Structure in CMOS Technology for Analogue Signal Processing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

View graph of relations
Original languageEnglish
Title of host publication2017 IEEE 85th Vehicular Technology Conference, VTC Spring 2017 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781509059324
Publication statusPublished - 14 Nov 2017
Event85th IEEE Vehicular Technology Conference, VTC Spring 2017 - Sydney, Australia
Duration: 4 Jun 20177 Jun 2017


Conference85th IEEE Vehicular Technology Conference, VTC Spring 2017


Design of high-performance continuous- time filter (CTF) for analogue signal processing is presented in this paper. To demonstrate of using a novel voltage-mode multiple-loop feedback (MLF) approach for CTF design, a 5th-order elliptic lowpass filter (LPF) is implemented in a standard 0.18-μm CMOS technology. The LPF is based on an inverse-follow-the-leader feedback structure with an input distribution network to generate the required transmission zeros. The LPF consumes 35 mA from a single 1.8 V power supply and it has a cut-off frequency of 30 MHz with less than 0.7 dB passband ripple and more than 60 dB stopband attenuation. In addition, a 65 dB dynamic range is achieved.

ID: 15579014