University of Hertfordshire

By the same authors

Design of miniaturized on-chip bandpass filters using inverting-coupled structure for millimter-wave applications

Research output: Chapter in Book/Report/Conference proceedingConference contribution

View graph of relations
Original languageEnglish
Title of host publication2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
Volume2019-May
ISBN (Electronic)9781728103976
DOIs
Publication statusPublished - 1 May 2019
Event2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019 - Sapporo, Japan
Duration: 26 May 201929 May 2019

Conference

Conference2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019
CountryJapan
CitySapporo
Period26/05/1929/05/19

Abstract

In this work, a new type of miniaturized on-chip resonator using an inductively-coupled structure is presented. The resonator is constructed by two spiral conductors that are implemented using two different metal layers. Since the two conductors are identical but placed in different rotating pattern, a kind of inductive coupling called inverting coupling will be introduced in addition to the broadside capacitive coupling. To fully understand the working mechanism of the resonator, simplified LC equivalent-circuit models and thorough analysis are provided. To further demonstrate the feasibility of the proposed miniaturized resonator in practice, two bandpass filters, namely a 1st-order and 2nd-order, are designed and fabricated in a standard 0.13-µm (Bi)-CMOS technology. Good agreements between simulation and measurement have obtained, which verify that the presented design approach is suitable for miniaturized on-chip passive design.

ID: 16958570