Design of Pi impedance matching networks

Y. Sun; J.K. Fidler

doi:10.1109/ISCAS.1994.409286

Design of Pi impedance matching networks

Y. Sun
, J.K. Fidler

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

509 Downloads (Pure)

Abstract

The Q-based method of Π impedance matching network design is studied systematically. A more practical definition of the loaded quality factor Q than that used hitherto is adopted. Designable conditions and design formulas based on the loaded Q are analytically demonstrated. Accurate explicit expressions of network frequency responses and harmonic rejection in term of the loaded Q are established and a method of determining the loaded Q for the required harmonic attenuation is developed. We also formulate all tolerance and parasitic sensitivities and their relations to the loaded Q.

Original language	English
Title of host publication	IEEE Int Symp on Circuits and Systems, ISCAS '94. Vol.5
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	5-8
ISBN (Print)	0-7803-1915-X
DOIs	https://doi.org/10.1109/ISCAS.1994.409286
Publication status	Published - 1994

Access to Document

10.1109/ISCAS.1994.409286

904249.pdf

Cite this

@inproceedings{f9645343a50d41bb9ba2d2ed60c4b7b5,

title = "Design of Pi impedance matching networks",

abstract = "The Q-based method of Π impedance matching network design is studied systematically. A more practical definition of the loaded quality factor Q than that used hitherto is adopted. Designable conditions and design formulas based on the loaded Q are analytically demonstrated. Accurate explicit expressions of network frequency responses and harmonic rejection in term of the loaded Q are established and a method of determining the loaded Q for the required harmonic attenuation is developed. We also formulate all tolerance and parasitic sensitivities and their relations to the loaded Q.",

author = "Y. Sun and J.K. Fidler",

note = "{\textquotedblleft}This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.{"} {\textquotedblleft}Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.{\textquotedblright}",

year = "1994",

doi = "10.1109/ISCAS.1994.409286",

language = "English",

isbn = "0-7803-1915-X",

pages = "5--8",

booktitle = "IEEE Int Symp on Circuits and Systems, ISCAS '94. Vol.5",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

}

TY - GEN

T1 - Design of Pi impedance matching networks

AU - Sun, Y.

AU - Fidler, J.K.

N1 - “This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”

PY - 1994

Y1 - 1994

N2 - The Q-based method of Π impedance matching network design is studied systematically. A more practical definition of the loaded quality factor Q than that used hitherto is adopted. Designable conditions and design formulas based on the loaded Q are analytically demonstrated. Accurate explicit expressions of network frequency responses and harmonic rejection in term of the loaded Q are established and a method of determining the loaded Q for the required harmonic attenuation is developed. We also formulate all tolerance and parasitic sensitivities and their relations to the loaded Q.

AB - The Q-based method of Π impedance matching network design is studied systematically. A more practical definition of the loaded quality factor Q than that used hitherto is adopted. Designable conditions and design formulas based on the loaded Q are analytically demonstrated. Accurate explicit expressions of network frequency responses and harmonic rejection in term of the loaded Q are established and a method of determining the loaded Q for the required harmonic attenuation is developed. We also formulate all tolerance and parasitic sensitivities and their relations to the loaded Q.

U2 - 10.1109/ISCAS.1994.409286

DO - 10.1109/ISCAS.1994.409286

M3 - Conference contribution

SN - 0-7803-1915-X

SP - 5

EP - 8

BT - IEEE Int Symp on Circuits and Systems, ISCAS '94. Vol.5

PB - Institute of Electrical and Electronics Engineers (IEEE)

ER -

Design of Pi impedance matching networks

Abstract

Access to Document

Fingerprint

Cite this