Influence of fin orientation on the natural convection of aqueous-based nano-encapsulated PCMs in a heat exchanger equipped with wing-like fins

S. A. Shehzad, Bader Alshuraiaan, Mohammed Saad Kamel, Mohsen Izadi, Tehmina Ambreen

Research output: Contribution to journalArticlepeer-review

Abstract

The heat transfer enhancement in pin-fin heat exchangers is achieved by fluid mixing, disruption of the thermal-viscous boundary and the extension of the effective surface area for maximum heat exchange. The orientation and configuration of the fins are among the prime factors influencing the performance of these heat exchangers. Therefore, the present study investigates the combined influences of fin angle (0≤ζ≤270), arrangement and position of the wing-like fins on the natural convection of aqueous-based nano-encapsulated phase change material (PCM) in a fin heat exchanger. The analysis is performed for Rayleigh and Stefan numbers of 1e3-1e5 and 0.2 respectively by considering the PCM concentration of 0.05. The flow is assumed to be laminar, incompressible and Newtonian. The results demonstrate that the vertical alignment of the fins contributes to the augmentation of the thermal performance compared to the horizontally arranged fins. At the larger Rayleigh number, the mode of heat transfer is predominantly convective and thermal performance slightly deteriorates due to the blockage caused by adjacent fins. For low Rayleigh number, the conduction is the primary mode of heat transfer between the source and sink fins. This phenomenon is crucial to determine the heat exchanger thermal performance.
Original languageEnglish
Pages (from-to)108287
Number of pages1
JournalChemical Engineering and Processing: Process Intensification
Volume160
DOIs
Publication statusPublished - 1 Mar 2021

Keywords

  • Nano-encapsulated PCM
  • Natural convection
  • Wing-like fins
  • heat source-sink
  • numerical solutions

Fingerprint

Dive into the research topics of 'Influence of fin orientation on the natural convection of aqueous-based nano-encapsulated PCMs in a heat exchanger equipped with wing-like fins'. Together they form a unique fingerprint.

Cite this