Second-order OTA-C filters using a single OTA

M. Hasan, Y. Sun, Y. Zhu

    Research output: Contribution to journalArticlepeer-review

    291 Downloads (Pure)

    Abstract

    A new voltage-mode second-order low pass OTA-C filter is proposed. The filter is integrator-based and uses only one OTA and two grounded capacitors. A multiple-input operational transconductance amplifier (OTA) for the simulation of the proposed filter is also described. The filter has been simulated using a 0.25μm CMOS process. The results show that for a cutoff frequency of 50 MHz, the filter dissipates 5.3mW power from a single 2V supply. The dynamic range and RMS noise are 63dB and 91μV (up to 100MHz), respectively. Further advantages of the proposed filter are frequency tunability, low sensitivity, low component count and ease of design. A current-mode equivalent of similar features and possibly better performance is also presented.
    Original languageEnglish
    Pages (from-to)201-204
    JournalProcs of the
    Volume2005
    DOIs
    Publication statusPublished - 2005

    Fingerprint

    Dive into the research topics of 'Second-order OTA-C filters using a single OTA'. Together they form a unique fingerprint.

    Cite this