In direct injection diesel engines, combustion and formation of pollutants are directly influenced by the spatial and temporal distributions of the injected fuel. In this study mixture formation during the pre-combustion phase of a diesel engine was investigated using the laser-induced exciplex fluorescence (LIEF) technique. The main purpose of this investigation was to develop an experimental setup capable of providing the full-field view of both liquid and vapour phases of evaporating diesel sprays during the fuel injection process inside the combustion chamber of a diesel engine with optical access. An expanded laser beam was employed for full combustion chamber visualisation. In this study two model fuels were tested; one consisted of 89% decane, 10% α-methyl-naphthalene and 1% TMPD and the other 88% decane, 10% α-methyl-naphthalene and 2% TMPD. The spray atomisation and evaporation processes during the pre-combustion phase of a diesel engine were measured at an injection pressure of 1200 bar and the engine speed of 1500 rpm. The results demonstrated the capability of the full-field LIEF technique in simultaneous imaging of liquid fraction and fuel vapour distribution during high pressure fuel injection process. It also highlighted the effect of dopant concentration on the fluorescence intensity of liquid and vapour signals. The exciplex system containing 1% TMPD produced better visualisation of the liquid phase, though the crosstalk in the vapour phase precluded accurate detection of the vapour phase signal. In contrast, the exciplex system containing 2% TMPD resulted in satisfactory visualisation of the vapour phase; however the intensity of the liquid phase was compromised as a result. This was presumed to be mainly due to the spectral shift of the exciplex species and/or TMPD decomposition at elevated temperatures and pressures.
|Journal||Experimental Thermal and Fluid Science|
|Early online date||23 May 2013|
|Publication status||Published - 1 Oct 2013|
- evaporating diesel sprays
- injection rate
- misture formation
- diesel engine