University of Hertfordshire

Applied Thermal Engineering

ISSNs: 1359-4311

Elsevier Limited

Scopus rating (2021): CiteScore 10.7 SJR 1.584 SNIP 1.888

Journal

  1. 2022
  2. Oriented square shaped pin-fin heat sink: Performance evaluation employing mixture based on ethylene glycol/water graphene oxide nanofluid

    Nawaz, S., Babar, H., Ali, H. M., Sajid, M. U., Janjua, M. M., Said, Z., Tiwari, A. K., Sundar, L. S. & Li, C., 1 Apr 2022, In: Applied Thermal Engineering. 206, 12 p., 118085.

    Research output: Contribution to journalArticlepeer-review

  3. Performance analysis of acceleration effect on paraffin melting in finned copper foam

    Tang, J., Xie, Y., Chang, S., Yan, Z., Wu, H. & Zhang, H., 5 Feb 2022, In: Applied Thermal Engineering. 202, 12 p., 117826.

    Research output: Contribution to journalArticlepeer-review

  4. 2021
  5. Temperature oscillation of a dual compensation chamber loop heat pipe under acceleration conditions

    Lv, X., Xie, Y., Zhang, H., Xu, Y., Wu, H., Day, R. & Ren, J., 1 Nov 2021, In: Applied Thermal Engineering. 198, 12 p., 117450.

    Research output: Contribution to journalArticlepeer-review

  6. A comparison between flat-plate and evacuated tube solar collectors in terms of energy and exergy analysis by using nanofluid

    Eltaweel, M., Abdel-Rehim, A. A. & Attia, A. A. A., 5 Mar 2021, In: Applied Thermal Engineering. 186, 116516.

    Research output: Contribution to journalArticlepeer-review

  7. 2019
  8. Thermal performance of a mine refuge chamber with human body heat sources under ventilation

    Zhang, Z., Wu, H., Wang, K., Day, R. & Yuan, Y., 5 Nov 2019, In: Applied Thermal Engineering. 162, 114243.

    Research output: Contribution to journalArticlepeer-review

  9. 2018
  10. Thermal Performance Analysis of an Underground Closed Chamber with Human Body Heat Sources under Natural Convection

    Zhang, Z., Day, R., Wang, K., Wu, H. & Yuan, Y., 25 Dec 2018, In: Applied Thermal Engineering. 145, p. 453-463 11 p., 145.

    Research output: Contribution to journalArticlepeer-review

  11. Experimental analysis and comparison between CO2 transcritical power cycles and R245fa organic Rankine cycles for low-grade heat power generations

    Li, L., Ge, Y. T., Luo, X. & Tassou, S. A., 25 May 2018, In: Applied Thermal Engineering. 136, p. 708-717 10 p.

    Research output: Contribution to journalArticlepeer-review

  12. Diameter effect on the heat transfer of supercritical hydrocarbon fuel in horizontal tubes under turbulent conditions

    Cheng, Z., Tao, Z., Zhu, J. & Wu, H., 1 Apr 2018, In: Applied Thermal Engineering. 134, p. 39-53 15 p.

    Research output: Contribution to journalArticlepeer-review

  13. Experimental investigation on transient characteristics of a dual compensation chamber loop heat pipe subjected to acceleration forces

    Xie, Y., Zhou, Y., Wen, D., Wu, H., Haritos, G. & Zhang, H., 5 Feb 2018, In: Applied Thermal Engineering. 130, p. 169-184 16 p.

    Research output: Contribution to journalArticlepeer-review

  14. 2017
  15. Experimental and numerical investigation of heat transfer in an array of impingement jets on a concave surface

    Yang, B., Chang, S., Wu, H., Zhao, Y. & Leng, M., 25 Dec 2017, In: Applied Thermal Engineering. 127, p. 473-483 11 p., 127.

    Research output: Contribution to journalArticlepeer-review

  16. Performance Analysis of a Novel Compact Air-air Heat Exchanger for Aircraft Gas Turbine Engine using LMTD method

    Li, H., Huang, H., Xu, G., Wen, J. & Wu, H., 1 Apr 2017, In: Applied Thermal Engineering. 116, p. 445-455 11 p.

    Research output: Contribution to journalArticlepeer-review

  17. Experimental investigations into power generation with low grade waste heat and R245fa Organic Rankine Cycles (ORCs)

    Li, L., Ge, Y. T., Luo, X. & Tassou, S. A., 10 Jan 2017, In: Applied Thermal Engineering. 115, p. 815-824 10 p.

    Research output: Contribution to journalArticlepeer-review

  18. Combustion and Exhaust Emission Characteristics of Low Swirl Injector

    Deng, Y., Wu, H. & Su, F., 5 Jan 2017, In: Applied Thermal Engineering. 110, p. 171-180 10 p.

    Research output: Contribution to journalArticlepeer-review

  19. Modeling Solubility of Nitrogen in Clean Fire Extinguishing Agent by Peng-Robinson Equation of State and a Correlation of Henry’s Law Constants

    Chen, M., Xie, Y., Wu, H., Shang, S. & Yu, J., 5 Jan 2017, In: Applied Thermal Engineering. 110, p. 457-468 11 p.

    Research output: Contribution to journalArticlepeer-review

  20. 2016
  21. Effects of piston bowl geometry on combustion and emissions characteristics of a natural gas/diesel RCCI engine

    Kakaee, A-H., Nasiri-Toosi, A., Partovi, B. & Paykani, A., 8 Aug 2016, In: Applied Thermal Engineering. 102, p. 1462-1472 11 p.

    Research output: Contribution to journalArticlepeer-review

  22. Thermodynamic analysis and comparison between CO2 transcritical power cycles and R245fa organic Rankine cycles for low grade heat to power energy conversion

    Li, L., Ge, Y. T., Luo, X. & Tassou, S. A., 5 Aug 2016, In: Applied Thermal Engineering. 106, p. 1290-1299 10 p.

    Research output: Contribution to journalArticlepeer-review

  23. Experimental Study of the Energy and Exergy performance for a Pressurized Volumetric Solar Receiver

    Zhu, J., Wang, K., Jiang, Z., Wu, H., Wang, D., Lin, F. & Li, Y., 5 Jul 2016, In: Applied Thermal Engineering. 104, p. 212-221 10 p.

    Research output: Contribution to journalArticlepeer-review

  24. Numerical Simulation of Sub-cooled Boiling Flow with Fouling Deposited inside Channels

    Liu, X., Zhang, X., Lu, T., Mahkamov, K., Wu, H. & Mirzaeian, M., 25 Jun 2016, In: Applied Thermal Engineering. 103, p. 434-442 9 p.

    Research output: Contribution to journalArticlepeer-review

  25. Thermal analysis of Phase Change Material Board (PCMB) under weather conditions in the summer

    Zhou, D., Tian, Y., Qu, Y. & Chen, Y., 25 Apr 2016, In: Applied Thermal Engineering. 99, p. 690-702 13 p.

    Research output: Contribution to journalArticlepeer-review

  26. A Two-dimensional Analytical Model for Prediction of the Radiation Heat Transfer in Open-cell Metal Foams

    Jiang, Z., Wang, K., Wu, H., Wang, Y. & Du, J., 25 Jan 2016, In: Applied Thermal Engineering. 93, p. 1273-1281 8 p.

    Research output: Contribution to journalArticlepeer-review

  27. 2015
  28. Experimental Investigation On the Operating Characteristics of a Dual Compensation Chamber Loop Heat Pipe Subjected to Acceleration Field

    Xie, Y., Zhang, J., Yu, J., Xie, L., Wu, H., Zhang, H. & Gao, H., 25 Apr 2015, In: Applied Thermal Engineering. 81, p. 297-312 16 p.

    Research output: Contribution to journalArticlepeer-review

  29. 2014
  30. Flow Structure and Heat Transfer Characteristics in Rotor-Stator Cavity with Inlet at Low Radius

    Luo, X., Zhao, X., Wang, L., Wu, H. & Xu, G., 5 Sep 2014, In: Applied Thermal Engineering. 70, 1, p. 291-306 16 p.

    Research output: Contribution to journalArticlepeer-review

  31. 2013
  32. Analysis and Simulation of Continuous Food Frying Processes

    Wu, H., Tassou, S. A., Karayiannis, T. G. & Jouhara, H., 2 May 2013, In: Applied Thermal Engineering. 53, 2, p. 332-339 8 p.

    Research output: Contribution to journalArticlepeer-review

  33. Analysis of recoverable exhaust energy from a light-duty gasoline engine

    Wang, T., Zhang, Y., Zhang, J., Shu, G. & Peng, Z. J., 2 May 2013, In: Applied Thermal Engineering. 53, 2, p. 414-419 6 p.

    Research output: Contribution to journalArticlepeer-review

  34. A Two-dimensional Frying Model for the Investigation and Optimisation of Continuous Industrial Frying System

    Wu, H., Karayiannis, T. G. & Tassou, S. A., 1 Mar 2013, In: Applied Thermal Engineering. 51, 1-2, p. 926-936 11 p.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 Next