University of Hertfordshire

  1. 2021
  2. Computational optimization of CH4/H2/CO blends in a spark-ignition engine using quasi-dimensional combustion model

    Paykani, A., Frouzakis, C., Schürch, C., Perini, F. & Boulouchos, K., 1 Nov 2021, In: Fuel. 303, 15 p., 121281.

    Research output: Contribution to journalArticlepeer-review

  3. Can the body slope of interference screw affect initial stability of reconstructed anterior cruciate ligament?: An in-vitro investigation

    Daneshvarhashjin, N., Chizari, M., Mortazavi, J. & Rouhi, G., 18 Jun 2021, In: BMC Musculoskeletal Disorders. 22, 1, 10 p., 556 .

    Research output: Contribution to journalArticlepeer-review

  4. New medium-low temperature hydrothermal geothermal district heating system based on distributed electric compression heat pumps and a centralized absorption heat transformer

    Sun, F., Hao, B., Fu, L., Wu, H., Xie, Y. & Wu, H., 1 Oct 2021, In: Energy. 232, 11 p., 120974.

    Research output: Contribution to journalArticlepeer-review

  5. Comparative Study on Chemical Kinetics Mechanisms for Methane-Based Fuel Mixtures under Engine-Relevant Conditions

    Paykani, A., 14 May 2021, In: Energies. 14, 10, 15 p., 2834.

    Research output: Contribution to journalArticlepeer-review

  6. Performance investigation of a loop heat pipe integrated with thermoelectric cooler under acceleration field

    Fang, Z., Xie, Y., Xu, Y., Wu, H., Zhang, H. & Han, L., 9 May 2021, (Accepted/In press) In: International Journal of Heat and Mass Transfer.

    Research output: Contribution to journalArticlepeer-review

  7. A brief review on nano phase change material-based polymer encapsulation for thermal energy storage systems

    CHEN, Y. K. & Hayat, M., 30 Apr 2021, Energy and Sustainable Futures: Proceedings of 2nd ICESF 2020. Mporas, I., Kourtessis, P., Al-Habaibeh, A., Asthana, A., Vukovic, V. & Senior, J. (eds.). Springer, Cham, p. 19-26 8 p. (Springer Proceedings in Energy book series (SPE)).

    Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)peer-review

  8. Low-Speed Aerodynamic Analysis Using Four Different Turbulent Models of Solver of a Wind Turbine Shroud

    Ngouani Siewe, M., CHEN, Y. K., Day, R. & David-West, O., 30 Apr 2021, Energy and Sustainable Futures: Proceedings of 2nd ICESF 2020. Mporas, I., Kourtessis, P., Al-Habaibeh, A., Asthana, A., Vukovic, V. & Senior, J. (eds.). Springer, Cham, p. 149-154 6 p. (Springer Proceedings in Energy book series (SPE)).

    Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)peer-review

  9. Prediction of steady-state two-phase flow of nitrogen + extinguishant in the pipeline and a correlation for mass flow rate

    Liu, S., Xie, Y., Chen, M., Rawska, J., Wu, H. & Yu, J., 27 Apr 2021, In: Journal of Thermal Analysis and Calorimetry.

    Research output: Contribution to journalArticlepeer-review

  10. A chemical kinetic study of low alcohol/iso-octane blends in both premixed and partially premixed combustion

    Rahnama, P., Bao, H., Somers, B., Paykani, A. & Novella, R., 15 Apr 2021.

    Research output: Contribution to conferencePaperpeer-review

  11. Entry in progress

    The Effect of Hybridisation on Composite Plates under Quasi-Static Loading

    David-West, O., 5 Apr 2021, (Submitted) In: Journal of Mechanical Engineering.

    Research output: Contribution to journalArticle

  12. Study on characteristics of particulate emission of diesel aftertreatment with reciprocating flow

    Deng, Y., Wang, X., Li, R., Han, Z., Wu, H., Dong, J., Cui, W. & Guo, Y., 1 Apr 2021, In: Energy Science & Engineering. 9, 4, 13 p.

    Research output: Contribution to journalArticlepeer-review

  13. Numerical and experimental investigations into protection net icing at the helicopter engine inlet

    Tang, J., Xie, Y., Zhu, J., Wang, X., Liu, S., Yu, J. & Wu, H., 29 Mar 2021, (Accepted/In press) In: Aircraft Engineering and Aerospace Technology.

    Research output: Contribution to journalArticlepeer-review

  14. Assessment of the Energy Consumption and Drivability Performance of an IPMSM-Driven Electric Vehicle Using Different Buried Magnet Arrangements

    Asef, P., Bargallo, R., Lapthorn, A., Tavernini, D., Shao, L. & Sorniotti, A., 4 Mar 2021, In: Energies. 14, 5, 22 p., 1418.

    Research output: Contribution to journalArticlepeer-review

  15. Overview of Sensitivity Analysis Methods Capabilities for Traction AC Machines in Electrified Vehicles

    Asef, P. & Lapthorn, A., 3 Feb 2021, In: IEEE Access. 9, p. 23454 - 23471 18 p.

    Research output: Contribution to journalArticlepeer-review

  16. A data driven deep neural network model for predicting boiling heat transfer in helical coils under high gravity

    Liang, X., Xie, Y., Day, R., Meng, X. & Wu, H., 1 Feb 2021, In: International Journal of Heat and Mass Transfer. 166, 16 p., 120743.

    Research output: Contribution to journalArticlepeer-review

  17. Reactivity controlled compression ignition engine: Pathways towards commercial viability

    Paykani, A., Garcia, A., Shahbakhti, M., Rahnama, P. & Reitz, R. D., 15 Jan 2021, In: Applied Energy. 282, Part A, 23 p., 116174.

    Research output: Contribution to journalArticlepeer-review

  18. Experimental investigation on heat recovery from flue gas using falling film method

    Min, C., Yang, X., He, J., Wang, K., Xie, L., Onwude, D., Zhang, W. & Wu, H., 13 Jan 2021, In: Thermal Science and Engineering Progress.

    Research output: Contribution to journalArticlepeer-review

  19. Recent progress in anodic oxidation of TiO2 nanotubes and enhanced photocatalytic performance: a short review

    Nie, X., Yin, S., Duan, W., Zhao, Z., Li, L. & Zhang, Z., 4 Jan 2021, In: Nano.

    Research output: Contribution to journalArticlepeer-review

  20. A Review of Boiling Heat Transfer Characteristics in Binary Mixtures

    Xu, J., Wang, Y., Yang, R., Liu, W., Wu, H., Ding, Y. & Li, Y., 1 Jan 2021, In: International Journal of Heat and Mass Transfer. 164, 28 p., 120570.

    Research output: Contribution to journalArticlepeer-review

  21. 2020
  22. Experimental investigation of the flame retardant and form-stable composite phase change materials for a power battery thermal management system

    Zhang, J., Li, X., Zhang, G., Wu, H., Rao, Z., Guo, J. & Zhou, D., 31 Dec 2020, In: Journal of Power Sources. 480, 11 p., 229116.

    Research output: Contribution to journalArticlepeer-review

  23. Improving the corrosion resistance of MgZn1.2GdxZr0.18 (x =0, 0.8, 1.4, 2.0) alloys via Gd additions

    Yin, S., Duan, W., Liu, W., Wu, L., Bao, J., Yu, J., Li, L., Zhao, Z., Cui, J. & Zhang, Z., 1 Dec 2020, In: Corrosion Science. 177, 108962.

    Research output: Contribution to journalArticlepeer-review

  24. Effect of injection strategies on a single-fuel RCCI combustion fueled with isobutanol/isobutanol + DTBP blends

    Mohammadian, A., Chehrmonavari, H., Kakaee, A. & Paykani, A., 15 Oct 2020, In: Fuel. 278, 13 p., 118219.

    Research output: Contribution to journalArticlepeer-review

  25. Energy Separation for Ranque-Hilsch Vortex Tube: A short review

    Hu, Z., Li, R., Yang, X., Yang, M., Day, R. & Wu, H., 1 Oct 2020, In: Thermal Science and Engineering Progress. 19, 10 p., 100559.

    Research output: Contribution to journalArticlepeer-review

  26. Damage Characterisation in Composite Laminates using Vibro-Acoustic Technique

    Andersen, K. G., Jombo, G., Ismail, S. O., Chen, Y. K., Dhakal, H. N. & Zhang, Y., 10 Sep 2020. 6 p.

    Research output: Contribution to conferencePaperpeer-review

  27. Effect of geometry on the fixation strength of anterior cruciate ligament reconstruction using BASHTI technique

    Moeinnia, H., Nourani, A., Borjali, A., Mohseni, M., Ghias, N., Korani, H. & Chizari, M., 8 Sep 2020, In: Journal of Knee Surgery.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next