University of Hertfordshire

From the same journal

By the same authors

A New Sliding Mode Control Strategy for Variable-Speed Wind Turbine Power Maximization

Research output: Contribution to journalArticlepeer-review

Standard

A New Sliding Mode Control Strategy for Variable-Speed Wind Turbine Power Maximization. / Tahir, Khalfallah; Belfedel, Ckeikh; Allaoui, Tayeb; Denai, Mouloud; Doumi, M'hamed.

In: European Transactions on Electrical Power, Vol. 28, No. 4, e2513, 01.04.2018.

Research output: Contribution to journalArticlepeer-review

Harvard

APA

Vancouver

Author

Tahir, Khalfallah ; Belfedel, Ckeikh ; Allaoui, Tayeb ; Denai, Mouloud ; Doumi, M'hamed. / A New Sliding Mode Control Strategy for Variable-Speed Wind Turbine Power Maximization. In: European Transactions on Electrical Power. 2018 ; Vol. 28, No. 4.

Bibtex

@article{e7b5b926ee024af7b4611a839a07a584,
title = "A New Sliding Mode Control Strategy for Variable-Speed Wind Turbine Power Maximization",
abstract = "The paper proposes a new sliding mode power control strategy for a wound-field synchronous generator-based variable speed wind energy conversion systems to maximize the power extracted from the wind turbine. The proposed controller can handle the inherent nonlinearities in wind energy conversion systems and the randomness of the wind speed as well as the uncertainties of the model and external disturbances. To reduce the chattering phenomenon that characterizes conventional sliding mode control, a sigmoid function with a variable boundary layer is proposed. The adaptive switching gains are adjusted on-line by using a fuzzy logic-based technique. Several simulation scenarios were performed to evaluate the performance of the proposed control scheme. The results demonstrate that this controller provides excellent response characteristics, is robust against parameter variations, and free from chattering phenomenon as compared with the conventional sliding mode control.",
keywords = "chattering phenomenon, fuzzy logic, maximum power point tracking, sliding mode control, wind energy conversion systems, wound-field synchronous generator",
author = "Khalfallah Tahir and Ckeikh Belfedel and Tayeb Allaoui and Mouloud Denai and M'hamed Doumi",
note = "This is the peer reviewed version of the following article: Khalfallah Tahir, Cheikh Belfedal, Tayeb Allaoui, Mouloud Denai, and M{\textquoteright}hamed Doumi, {\textquoteleft}A new sliding mode control strategy for variable‐speed wind turbine power maximization{\textquoteright}, International Transactions on Electrical Energy Systems, Vol. 28 (4): e2513, April 2018, which has been published in final form at https://doi.org/10.1002/etep.2513. Under embargo until 10 January 2019. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. ",
year = "2018",
month = apr,
day = "1",
doi = "10.1002/etep.2513",
language = "English",
volume = "28",
journal = "European Transactions on Electrical Power",
issn = "2050-7038",
publisher = "John Wiley and Sons Ltd",
number = "4",

}

RIS

TY - JOUR

T1 - A New Sliding Mode Control Strategy for Variable-Speed Wind Turbine Power Maximization

AU - Tahir, Khalfallah

AU - Belfedel, Ckeikh

AU - Allaoui, Tayeb

AU - Denai, Mouloud

AU - Doumi, M'hamed

N1 - This is the peer reviewed version of the following article: Khalfallah Tahir, Cheikh Belfedal, Tayeb Allaoui, Mouloud Denai, and M’hamed Doumi, ‘A new sliding mode control strategy for variable‐speed wind turbine power maximization’, International Transactions on Electrical Energy Systems, Vol. 28 (4): e2513, April 2018, which has been published in final form at https://doi.org/10.1002/etep.2513. Under embargo until 10 January 2019. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.

PY - 2018/4/1

Y1 - 2018/4/1

N2 - The paper proposes a new sliding mode power control strategy for a wound-field synchronous generator-based variable speed wind energy conversion systems to maximize the power extracted from the wind turbine. The proposed controller can handle the inherent nonlinearities in wind energy conversion systems and the randomness of the wind speed as well as the uncertainties of the model and external disturbances. To reduce the chattering phenomenon that characterizes conventional sliding mode control, a sigmoid function with a variable boundary layer is proposed. The adaptive switching gains are adjusted on-line by using a fuzzy logic-based technique. Several simulation scenarios were performed to evaluate the performance of the proposed control scheme. The results demonstrate that this controller provides excellent response characteristics, is robust against parameter variations, and free from chattering phenomenon as compared with the conventional sliding mode control.

AB - The paper proposes a new sliding mode power control strategy for a wound-field synchronous generator-based variable speed wind energy conversion systems to maximize the power extracted from the wind turbine. The proposed controller can handle the inherent nonlinearities in wind energy conversion systems and the randomness of the wind speed as well as the uncertainties of the model and external disturbances. To reduce the chattering phenomenon that characterizes conventional sliding mode control, a sigmoid function with a variable boundary layer is proposed. The adaptive switching gains are adjusted on-line by using a fuzzy logic-based technique. Several simulation scenarios were performed to evaluate the performance of the proposed control scheme. The results demonstrate that this controller provides excellent response characteristics, is robust against parameter variations, and free from chattering phenomenon as compared with the conventional sliding mode control.

KW - chattering phenomenon

KW - fuzzy logic

KW - maximum power point tracking

KW - sliding mode control

KW - wind energy conversion systems

KW - wound-field synchronous generator

UR - http://www.scopus.com/inward/record.url?scp=85040235090&partnerID=8YFLogxK

U2 - 10.1002/etep.2513

DO - 10.1002/etep.2513

M3 - Article

VL - 28

JO - European Transactions on Electrical Power

JF - European Transactions on Electrical Power

SN - 2050-7038

IS - 4

M1 - e2513

ER -