University of Hertfordshire

From the same journal

BS-ISO helical gear fatigue life estimation and wear quantitative features analysis

Research output: Contribution to journalArticlepeer-review

Documents

  • M.A. Khan
  • A. Starr
  • D. Cooper
View graph of relations
Original languageEnglish
Pages (from-to)358-363
JournalStrain
Volume45
Issue4
DOIs
Publication statusPublished - 2009

Abstract

Lack of representative theoretical models for gear wear causes difficulties in their useful lifetime prediction. Critical operating parameters, such as loading and lubrication, affect the wear process in a very complex manner and lead the theoretical modelling to an imperfect zone of assumptions. Complexities in gear wear mathematical modelling allow the researchers to use approximations for useful lifetime calculations. On the basis of modelling approximations and assumptions, organizations, such as American Gear Manufacturers' Association (AGMA) and British Standards (BS), provide gear useful lifetime formulations. In these formulations, the useful lifetime values are estimated by means of experimentation that is controlled with known gear operating conditions and physical dimensions. However, for useful lifetime estimation and validation, these standards have not considered any experimental approach that represents the actual gear wear. In this paper, an effort is made to validate the competency of standard's gear useful lifetime formulation. For this purpose, an approach that is able to provide an idea about actual gear wear is used. During the effort, BS-ISO 6336-2 standard formulation is used for helical gear useful lifetime estimation under linear pitting fatigue conditions. The used formulation is validated by using wear quantitative feature analysis that is able to provide actual gear wear quantitative trends. The obtained wear quantitative trends fairly validate the lifetime estimation of BS-ISO 6336-2 standard.

Notes

Original article can be found at: http://www3.interscience.wiley.com/ Copyright Blackwell Publishing. DOI: 10.1111/j.1475-1305.2008.00457.x

ID: 111617