University of Hertfordshire

From the same journal

By the same authors

Documents

View graph of relations
Original languageEnglish
Article number102975
JournalInternational Journal of Greenhouse Gas Control
Volume95
DOIs
Publication statusPublished - 4 Feb 2020

Abstract

To accelerate the deployment of Carbon Capture and Storage (CCS) based on the solid amine adsorbents towards a practical scale application relevant to Natural Gas Combined Cycle (NGCC) power plants, this study has evaluated the cyclic performance of a polyethylenimine/silica adsorbent of kg scale in a laboratory scale bubbling fluidized bed reactor. A high volumetric concentration 80−90 vol% of steam mixed with N 2 and CO 2 has been used as the stripping gas during a typical temperature swing adsorption (TSA) cycle. Both the simulated NGCC flue gas and the actual flue gas from a domestic gas boiler have been used as the feed gas of the CO 2 capture tests with the solid adsorbent. Various characterization has been carried out to elucidate the possible reasons for the initial capacity decline under the steam regeneration conditions. The effect of presence of CO 2 in the stripping gas has also been studied by comparing the working capacities using different regeneration strategies. It has been demonstrated that the breakthrough and equilibrium CO 2 adsorption capacities can be stabilized at approximately 5.9 wt% and 8.6 wt%, respectively, using steam regeneration for both the simulated and actual natural gas boiler flue gases. However, using a concentration of 15 vol% CO 2 in the stripping gas has resulted in a significantly low working capacity at a level of 1.5 wt%, most likely due to the incomplete CO 2 desorption and degradation in a CO 2 containing environment.

ID: 18987824