University of Hertfordshire

From the same journal

By the same authors


View graph of relations
Original languageEnglish
Article number 10.1109/TCSI.2019.2948754
Number of pages11
JournalIEEE Transactions on Circuits and Systems I: Regular Papers
Early online date31 Oct 2019
Publication statusE-pub ahead of print - 31 Oct 2019


In this work, a new type of miniaturized on-chip resonator using coupled-inductor structure is presented. The impact on resonances of the structure due to the use of non- inverting- and inverting-coupled configuration is extensively investigated. It has been found that using the inverting-coupled structure, a stronger resonance can be generated, which is ideally suitable for device miniaturization. To fully understand the working mechanism of the resonator and use it effectively for bandpass filter (BPF) design, simplified LC equivalent-circuit models and detailed theoretical analysis are provided. To further demonstrate the proposed concept is useful in practice, not only a 1st-order BPF, but also another two 2nd-order BPFs are designed and fabricated in a standard 0.13-μm (Bi)-CMOS technology. All of them are designed to have a centre frequency around 15 GHz. Their physical dimensions are 0.13 x 0.25 mm², 0.26 x 0.25 mm², 0.24 x 0.22 mm², respectively. Good agreements between simulation and measurement have been obtained, which verify that the presented design approach is suitable for miniaturized on-chip passive design.


© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

ID: 17828212