University of Hertfordshire

From the same journal

By the same authors

View graph of relations
Original languageEnglish
Pages (from-to)367-382
Number of pages16
JournalInternational Journal of Circuit Theory and Applications
Volume38
Issue4
DOIs
Publication statusPublished - 2010

Abstract

The leap-frog (LF) configuration is an important structure in analogue filter design. Voltage-mode LF OTA-C filters have recently been studied in the literature; however, general explicit formulas do not exist for current-mode LF OTA-C filters and there is also need for current-mode LF-based OTA-C structures for realization of arbitrary transmission zeros. Three current-mode OTA-C structures are presented, including the basic LF structure and LF filters with an input distributor or an output summer. They can realize all-pole characteristics and functions with arbitrary transmission zeros. Explicit design formulas are derived directly from these structures for the synthesis of, respectively, all-pole and arbitrary zero filter characteristics of up to the sixth order. The filter structures are regular and the design formulas are straightforward to use. As an illustrative example, a 300 MHz seventh-order linear phase low-pass filter with zeros is presented. The filter is implemented using a fully differential linear operational transconductance amplifier (OTA) based on a source degeneration topology. Simulations in a standard TSMC 0.18µm CMOS process with 2.5 V power supply have shown that the cutoff frequency of the filter ranges from 260 to 320 MHz, group delay ripple is about 4.5% over the whole tuning range, noise of the filter is 420nA/Hz, dynamic range is 66 dB and power consumption is 200 mW.

Notes

The defnitive article can be found at: http://www3.interscience.wiley.com/ Copyright Wiley. [Full text of this article is not available in the UHRA]

ID: 111172