University of Hertfordshire

From the same journal

By the same authors

Spectral subtraction and enhancement for torsional waves propagating in coated pipes

Research output: Contribution to journalArticlepeer-review

Standard

Spectral subtraction and enhancement for torsional waves propagating in coated pipes. / Duan, Wenbo; Kanfoud, Jamil; Deere, Matthew; Mudge, Peter; Gan, Tat Hean.

In: NDT and E International, Vol. 100, 01.12.2018, p. 55-63.

Research output: Contribution to journalArticlepeer-review

Harvard

APA

Vancouver

Author

Duan, Wenbo ; Kanfoud, Jamil ; Deere, Matthew ; Mudge, Peter ; Gan, Tat Hean. / Spectral subtraction and enhancement for torsional waves propagating in coated pipes. In: NDT and E International. 2018 ; Vol. 100. pp. 55-63.

Bibtex

@article{65c635df06fa4d529801483599abef3b,
title = "Spectral subtraction and enhancement for torsional waves propagating in coated pipes",
abstract = "Ultrasonic guided waves are routinely used for inspection of pipelines. The technique is well established for uncoated pipes where attenuation is very low. However, when the pipe is coated, buried or immersed, sound energy will be absorbed by the coating or radiate into the surrounding medium. Attenuation will increase and the scanning distance will be significantly reduced. The noise level can also increase when the condition of the coating material degrades with age and the bonding condition between pipe and coating becomes unevenly distributed. The increase of attenuation ratio and noise level therefore makes the inspection of ultrasonic waves propagating in coated and buried pipelines particularly difficult. It is often desirable to identify small features amongst the noise floor. To improve signal to noise ratio under these conditions, two techniques are proposed for the study of the propagation of torsional waves in Denso Tape coated pipes. A frequency domain, backward wave cancelling algorithm is used to eliminate the reflected waves coming from the backward direction and clean up the signal. On this basis, a spectral subtraction method is used, which requires knowledge of a small section of pipe that includes no real features, so that the signal from this region provides the characteristic noise signature of the pipe itself. The spectrum of the noise signature is calculated and then subtracted from the total signal using a sliding window technique. Furthermore, a signal region, for instance,the reflected signal from a pipe weld or end, is specified. This represents the characteristic of the incident signal and any signal similar in shape will be enhanced using the sliding window technique. These two techniques serve to reduce the noise floor and enhance small signals that may be buried in it. This is important for ultrasonic non-destructive testing applications in coated and buried pipes.",
keywords = "Backward wave cancelling, Denso tape coated pipe, Guided waves, Spectral enhancement, Spectral subtraction",
author = "Wenbo Duan and Jamil Kanfoud and Matthew Deere and Peter Mudge and Gan, {Tat Hean}",
year = "2018",
month = dec,
day = "1",
doi = "10.1016/j.ndteint.2018.08.009",
language = "English",
volume = "100",
pages = "55--63",
journal = "Ceramics International",
issn = "0272-8842",
publisher = "Elsevier Limited",

}

RIS

TY - JOUR

T1 - Spectral subtraction and enhancement for torsional waves propagating in coated pipes

AU - Duan, Wenbo

AU - Kanfoud, Jamil

AU - Deere, Matthew

AU - Mudge, Peter

AU - Gan, Tat Hean

PY - 2018/12/1

Y1 - 2018/12/1

N2 - Ultrasonic guided waves are routinely used for inspection of pipelines. The technique is well established for uncoated pipes where attenuation is very low. However, when the pipe is coated, buried or immersed, sound energy will be absorbed by the coating or radiate into the surrounding medium. Attenuation will increase and the scanning distance will be significantly reduced. The noise level can also increase when the condition of the coating material degrades with age and the bonding condition between pipe and coating becomes unevenly distributed. The increase of attenuation ratio and noise level therefore makes the inspection of ultrasonic waves propagating in coated and buried pipelines particularly difficult. It is often desirable to identify small features amongst the noise floor. To improve signal to noise ratio under these conditions, two techniques are proposed for the study of the propagation of torsional waves in Denso Tape coated pipes. A frequency domain, backward wave cancelling algorithm is used to eliminate the reflected waves coming from the backward direction and clean up the signal. On this basis, a spectral subtraction method is used, which requires knowledge of a small section of pipe that includes no real features, so that the signal from this region provides the characteristic noise signature of the pipe itself. The spectrum of the noise signature is calculated and then subtracted from the total signal using a sliding window technique. Furthermore, a signal region, for instance,the reflected signal from a pipe weld or end, is specified. This represents the characteristic of the incident signal and any signal similar in shape will be enhanced using the sliding window technique. These two techniques serve to reduce the noise floor and enhance small signals that may be buried in it. This is important for ultrasonic non-destructive testing applications in coated and buried pipes.

AB - Ultrasonic guided waves are routinely used for inspection of pipelines. The technique is well established for uncoated pipes where attenuation is very low. However, when the pipe is coated, buried or immersed, sound energy will be absorbed by the coating or radiate into the surrounding medium. Attenuation will increase and the scanning distance will be significantly reduced. The noise level can also increase when the condition of the coating material degrades with age and the bonding condition between pipe and coating becomes unevenly distributed. The increase of attenuation ratio and noise level therefore makes the inspection of ultrasonic waves propagating in coated and buried pipelines particularly difficult. It is often desirable to identify small features amongst the noise floor. To improve signal to noise ratio under these conditions, two techniques are proposed for the study of the propagation of torsional waves in Denso Tape coated pipes. A frequency domain, backward wave cancelling algorithm is used to eliminate the reflected waves coming from the backward direction and clean up the signal. On this basis, a spectral subtraction method is used, which requires knowledge of a small section of pipe that includes no real features, so that the signal from this region provides the characteristic noise signature of the pipe itself. The spectrum of the noise signature is calculated and then subtracted from the total signal using a sliding window technique. Furthermore, a signal region, for instance,the reflected signal from a pipe weld or end, is specified. This represents the characteristic of the incident signal and any signal similar in shape will be enhanced using the sliding window technique. These two techniques serve to reduce the noise floor and enhance small signals that may be buried in it. This is important for ultrasonic non-destructive testing applications in coated and buried pipes.

KW - Backward wave cancelling

KW - Denso tape coated pipe

KW - Guided waves

KW - Spectral enhancement

KW - Spectral subtraction

UR - http://www.scopus.com/inward/record.url?scp=85053209785&partnerID=8YFLogxK

U2 - 10.1016/j.ndteint.2018.08.009

DO - 10.1016/j.ndteint.2018.08.009

M3 - Article

AN - SCOPUS:85053209785

VL - 100

SP - 55

EP - 63

JO - Ceramics International

JF - Ceramics International

SN - 0272-8842

ER -