University of Hertfordshire

From the same journal

By the same authors

Tribological analysis of engineering plastics/steel friction pairs

Research output: Contribution to journalArticlepeer-review

Documents

  • Robert Keresztes
  • Gabor Kalacska
  • Rajini Nagarajan
  • Karthikeyan Subramanian
  • Sukumaran Jacob
  • S. O. Ismail
View graph of relations
Original languageEnglish
Number of pages12
JournalTransactions of the Indian Institute of Metals
Early online date17 Apr 2021
DOIs
Publication statusE-pub ahead of print - 17 Apr 2021

Abstract

This study involves the case of polymer–metal contact, where deformation and strain behavior play a significant role. In present work, a section of polymer gear is mated against steel gear, and the friction behaviors for different groups of polymer materials of PA 6G, PA 6G Mg, POM-C, PETP/PTFE, PA 66 GF 30 and Bakelite were experimentally studied. From the results obtained, all the materials coefficient of friction decreased significantly at the pitch point. This was attributed to the pure rolling at the pitch point and tangential traction, which was the dominant mechanism for resistance to motion. An unstable friction characteristic from flank tooth to the pitch point was evident in the low load conditions.

Notes

© The Indian Institute of Metals - IIM 2021. This is the accepted manuscript version of an article which has been published in final form at https://doi.org/10.1007/s12666-021-02231-8

ID: 24887383